WHERE TO USE
Areas - All interior timber, Exterior timber
Substrates - All interior timber
Locations - Interior, Exterior

SURFACE PREP

Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material.

APPLICATION

Methods: Filling blade or knife

1. Apply WoodBlend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing two hours drying time between each stage.
2. To ease application, dampen blade with water.
3. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish.
4. When using clear finishes, apply WoodBlend after the first coat of clear to minimise smudging.
5. For use as a grain filler, thin WoodBlend with 5-10% water to achieve required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain.

IMPORTANT: Keep container tightly closed when not in use.