Skip to content

Follow us!

Free shipping for orders over $199 Aus. $249 NZ

🌿 All deliveries are carbon neutral

Get in touch with us


$4.99 $13.00
Unit price  per 

Guaranteed safe & secure checkout

    Payment methods
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Visa

Snap-LOC Clip for TREX Transcend Decking

Made of Engineered Nylon

40 strips (10m²) per box. Each strip is 584 x 40mm and holds 4 boards.

Screws not included - need 360 screws per box.

The KlevaKlip Snap-Loc clip for Trex decking is approved for use with Trex boards in Australia.

Whilst Trex decking has for quite some time had a groove in the side of the board to allow a “biscuit-type” fixing to be used to hold down the boards, biscuit clips tend to be quite fiddly due to having to fit the “biscuit” into the groove in the board and the drive a very small headed screw in between the boards. It is a two-part process as the screws cannot be fully tightened until the following board is laid. Moving from joist to joist fitting and tightening clips is certainly no slower than conventional screwing down of a decking board, but it is tedious, hot work. There must be a better way........


KlevaKlip has been supplying fixed spacing, continuous clipping systems into the Australian decking market for over ten years, with many millions of clips having been installed on decks.

Our new clip, manufactured from High Quality Engineered Impact Modified Nylon, for Trex® Transcend decking, is two to three times faster to install than conventional “biscuit-type” decking clips.

For the decking contractor this means you can quickly get the job finished and move onto the next job, whilst for the DIY-er, your time to sit back and enjoy your first beer on the deck is ever so closer.

 Aesthetic appeal - your deck looks great without the distraction of top-fixed screws or nails

 Super-fast fixing system - up to three times faster than conventional concealed fixing

 Extremely easy to use - almost impossible to get wrong

 Non-corrosive – able to be used in all high corrosion environments - such as coastal areas salt or chlorinated pools 

  UV stabilised to last the life of your deck

 Equally easy to use with timber or steel joists

 Can be fixed to the joists with screws, connector nails or by nail gun

 Can be used in conjunction with biscuit type clips in rounded and angled areas

 Dove-tail joiner ensures there is never a run-out in your deck

"New" 4mm Continuous Packer

Made of Impact Modified Polypropylene

20 strips per box. Each strip is 570 x 40mm

Screws not included - need 180 screws per box.

 4 mm Continuous Packer has been designed to be used in conjunction with the Snap-LOC clip when screw fixing breaker, picture framing boards or mitre joints.

 Dove-tail joiner makes for easy laying.

How does the Snap-LOC Clip for Trex work?

KlevaKlip is a multi-board, fixed pitch decking system that provides consistent gapping between the boards. The new Snap-Loc clips allow the boards to be snapped into the clip by the weight of someone “walking the board into the clip”. The teeth of the clip flex, allowing the board to insert into the clip, then “snap” into the groove of the board, locking it in place.

Made from High Quality Engineered Impact Modified Nylon,  the Snap-Loc clip is built to last the life of your deck



Didn't find your answer?

Our customer service will be happy to help you.

This section doesn’t currently include any content. Add content to this section using the sidebar.

How you can help

Whenever you purchse any of our products you are helping a small decking supply company go up against the big guys :)

How you can help

Yes, we are new and are building up our product offering. Let us know if we aren't stocking your favourite product and we will seriously look into each and every request.

How you can help

Share with your friends, let them know about our great service, range of products and great prices!